Blow Molding
Follow instructions for extrusion or injection depending on the type of blow molding performed.
- For machinery with accumulators, introduce additional ASACLEAN® (add enough additional ASACLEAN to fill each or all the accumulators).
- More ASACLEAN will be required if any additional auxiliary equipment is present or if the machine has heavy deposits.
- If a piston is present in the accumulator, an up and down "jogging" motion of the piston may help loosen stubborn deposits.
- If the accumulator is heated, raising temperatures up to 50°F in the accumulator may also help loosen deposits.
