EX Grade
EX Grade is our strongest-cleaning purging compound for thermoplastic injection molding and extrusion machines. EX Grade is glass-filled to provide excellent scrubbing of carbon and / or color deposits while especially designed to leave less purging compound residue behind. EX Grade is suitable for purging a wide range of commodity, engineering, and super-engineering resins. EX is especially recommended for helping prevent machine overhauls or for facilitating screw-pulls if they are mandatory.
 |
High Detergency | |
Glass-filled |
|
Styrenic-Based | ||
|
Resins Purged: Most commodity and engineering resins within the processing temperature range. |
||
|
EX Grade is ideal for hard to purge resins requiring maximum deposit removal |
||
|
Generally NOT recommended for hot runner cleaning and sealing due to its glass content |
||
|
EX Grade should not be left idle in a machine, at any temperature, for longer than 30 minutes |
||
| EX | See our other grades | ||
 |
Color Changes |  |
|
| Material Changes | |
||
| Hot Runner Cleaning | Advantage, UP, U, E | ||
| Shutdown/Sealing | Advantage, UP, U, E | ||
| Clear/Low Residue Applications | E | ||
| High Temperature Resins | SX | ||
| Low Temperature Resins | |
||
| Carbon/Color Contamination | |
Processing temperature: 390°F to 680°F (200°C to 360°C)
Please speak to a Technical Sales representative for further information on hot runner gate and extrusion die clearances.
Tips when using ASACLEAN:
 |
ASACLEAN does not work by chemical reaction. |
| |
No soak time or hold-up time is required for an effective purge |
| |
For maximum performance, ASACLEAN should not be diluted with other materials. |
| |
ASACLEAN works best with maximum agitation. Use the maximum safe screw speed and for injection molding also use maximum safe back pressure with the screw in the most forward position. |
[x] close
Usage Example: Color change from black g/f PPE to natural ABS
Color changes from dark to light colors can often be difficult and are time consuming. With its high scrubbing power, EX Grade cleans even the most
stubborn color deposits quickly and effectively.
| WITHOUT ASACLEAN
[Machine: 100 ton injection molding machine at 536 F (280 C)]  |
|
 |
Once the purge pile appeared clean, the machine was purged with ASACLEAN EX Grade and additional contamination was observed. |
 |
WITH ASACLEAN No additional purging was required after using ASACLEAN EX Grade the first time. |
