/ 4 min read

3 Ways to Prepare for Your 2022 Thanksgiving Shutdown

3 Ways to Prepare for Your 2022 Thanksgiving Shutdown


As we close out October, year end is just around the corner.  The challenges of the past few years make processing efficiency more important than ever. As you move closer to the new year and prepare for your holiday shutdowns, here are three year-end ideas to get a jump start on a successful 2023.

1.) Pull the screw. The Thanksgiving Shutdown is one of the most popular times for processors to conduct preventative maintenance.  You should pull screws from machines to give a manual inspection to ensure all the equipment is in perfect working condition. It’s also a great opportunity to make any necessary repairs without impacting efficiency.  While screw pulls can cause headaches, there are some purging compounds that make the process much easier.  Check out the short 90-second comparison of a screw pull with Black ABS vs. a screw pull with Asaclean EX Grade to see the difference a purging compound can make.  

2.) Seal the machine. The next suggested best practice for a holiday PM comes just prior to shutting down. If you don't pull the screw and plan on going straight into shutdown from the last production, I strongly encourage you to seal using a purging compound. This will save you substantial time when you start back up after the break. Apply a full barrel at the end of the production run immediately before you shut down.  The sealing grade will coat the screw and barrel preventing any oxidation to occur while the machine sits idly for the holiday break.  At the time of start-up when the machine gets up to temperature, displace the purge and enjoy a fast start-up with better part-to-part quality. 

3.) Look for resin deals. As some companies try to reduce inventories, take advantage of year-end resin buys.  Some resin suppliers would like to get any excess inventory off the books.  Nowadays, processors are too busy to drop inventory when they will need product going headstrong into the new year.

Learn how to reduce machine downtime with five quick purging compound tips for your injection molding application.

Related Posts

Comments

Get Started

Ready to start improving your efficiency and increasing your profitability?

Free Sample

Request a free sample of Asaclean® Purging Compounds for your plant and start saving today.

Request your free sample

Cost Savings Calculator

Use our free calculator to see how much you could be saving with Asaclean® Purging Compounds.

See your savings