Testimonials

Don’t take our word for it. Hear what actual Asaclean® customers have to say about their experiences using Asaclean® at their plants.

We've tried pretty much every competitor, some of them twice. Between Asaclean®'s performance and expert technical servi..........
We've tried pretty much every competitor, some of them twice. Between Asaclean®'s performance and expert technical service, we're not looking to make a change.
John S., Manufacturing Manager
Read full testimonial
We've tried pretty much every competitor, some of them twice. Between Asaclean®'s performance and expert technical service, we're not looking to make a change.
John S., Manufacturing Manager
This stuff was pretty shocking to me because, one, it was just so easy …and two, it cleans incredibly well.
This stuff was pretty shocking to me because, one, it was just so easy …and two, it cleans incredibly well.
Ray D., Plant Manager
Read full testimonial
This stuff was pretty shocking to me because, one, it was just so easy …and two, it cleans incredibly well.
Ray D., Plant Manager
I totally believe in the Asaclean® product. We go from Black Nylon to Clear pp with incredible ease.
I totally believe in the Asaclean® product. We go from Black Nylon to Clear pp with incredible ease.
Vincent Zirkle, Plant Manager, Blue Ridge Molding
Read full testimonial
I totally believe in the Asaclean® product. We go from Black Nylon to Clear pp with incredible ease.
Vincent Zirkle, Plant Manager
The PLUS effectively cleans out our hot runner molds. I’m surprised that it seems to work even better in smaller gates t..........
The PLUS effectively cleans out our hot runner molds. I’m surprised that it seems to work even better in smaller gates that build more pressure than the larger gates. We use it every time as a routine and cleaning gets easier.
Lucas Edwards, 1st Shift Supervisor, CH3
Read full testimonial
The PLUS effectively cleans out our hot runner molds. I’m surprised that it seems to work even better in smaller gates that build more pressure than the larger gates. We use it every time as a routine and cleaning gets easier.
Lucas Edwards, 1st Shift Supervisor
I’m absolutely amazed with the performance of Asaclean®. The polymers/fillers that I’m mixing in our small compounder re..........
I’m absolutely amazed with the performance of Asaclean®. The polymers/fillers that I’m mixing in our small compounder really stick to the equipment, and we can only get about 80 – 90% out of the mixer post-run, so it’s quite a mess. Put Asaclean® E in, mix for a few minutes, and the mixer body is immediately clean.
Robert Rosen, Director of Materials Development, Evonix
Read full testimonial
I’m absolutely amazed with the performance of Asaclean®. The polymers/fillers that I’m mixing in our small compounder really stick to the equipment, and we can only get about 80 – 90% out of the mixer post-run, so it’s quite a mess. Put Asaclean® E in, mix for a few minutes, and the mixer body is immediately clean.
Robert Rosen, Director of Materials Development
Before Asaclean®, we used around $10,000 worth of ABS to purge each month. With Asaclean®, we saved that resin and our p..........
Before Asaclean®, we used around $10,000 worth of ABS to purge each month. With Asaclean®, we saved that resin and our purge cost per month is now to $4,000. The savings are clear and we all see how the usage of Asaclean® is justified!
Francisco Miranda, Buyer
Read full testimonial
Before Asaclean®, we used around $10,000 worth of ABS to purge each month. With Asaclean®, we saved that resin and our purge cost per month is now to $4,000. The savings are clear and we all see how the usage of Asaclean® is justified!
Francisco Miranda, Buyer
From a buying standpoint, one thing that really sticks out regarding Asaclean® is that they truly are solutions provider..........
From a buying standpoint, one thing that really sticks out regarding Asaclean® is that they truly are solutions providers. They help us solve the problem. They have provided technical support, training, and product support followed.
Ray R., Supply Chain Manager
Read full testimonial
From a buying standpoint, one thing that really sticks out regarding Asaclean® is that they truly are solutions providers. They help us solve the problem. They have provided technical support, training, and product support followed.
Ray R., Supply Chain Manager
Today I trialed Asaclean® vs. a competitor and found that Asaclean® removed way more contamination. It was pretty remark..........
Today I trialed Asaclean® vs. a competitor and found that Asaclean® removed way more contamination. It was pretty remarkable how when using the competitor, the compound just looked like straight compound that came out of the barrel as if as if my machine wasn't running colorant additives. With Asaclean®, it removed the colorant out and displaced the purge to a clear consistency right away. We had no residue. This allowed us to go right back into running good parts with the least amount of scrap I've ever seen.
Dan , Process Engineer
Read full testimonial
Today I trialed Asaclean® vs. a competitor and found that Asaclean® removed way more contamination. It was pretty remarkable how when using the competitor, the compound just looked like straight compound that came out of the barrel as if as if my machine wasn't running colorant additives. With Asaclean®, it removed the colorant out and displaced the purge to a clear consistency right away. We had no residue. This allowed us to go right back into running good parts with the least amount of scrap I've ever seen.
Dan , Process Engineer
I've been using Asaclean® for 6 years. I love it. I recently started a new job and insisted on my team using Asaclean®. ..........
I've been using Asaclean® for 6 years. I love it. I recently started a new job and insisted on my team using Asaclean®. It immediately reduced our changeover time from 4 hours down to 15 minutes. It's a great product and I recommend it to everyone.
Chris , Production Manager
Read full testimonial
I've been using Asaclean® for 6 years. I love it. I recently started a new job and insisted on my team using Asaclean®. It immediately reduced our changeover time from 4 hours down to 15 minutes. It's a great product and I recommend it to everyone.
Chris , Production Manager
Every time I have used the EX Grade I have been very pleased. It is super effective before clear/transparent jobs. I hav..........
Every time I have used the EX Grade I have been very pleased. It is super effective before clear/transparent jobs. I have been using it followed by the E Grade part of the time. I am finding the E Grade isn’t always necessary; the EX Grade comes out of the barrel quickly enough for most applications.
Bryan , Process Engineer
Read full testimonial
Every time I have used the EX Grade I have been very pleased. It is super effective before clear/transparent jobs. I have been using it followed by the E Grade part of the time. I am finding the E Grade isn’t always necessary; the EX Grade comes out of the barrel quickly enough for most applications.
Bryan , Process Engineer
I was struggling with color changeovers on a hot runner tool. I reached out to a few purge companies, but we went with A..........
I was struggling with color changeovers on a hot runner tool. I reached out to a few purge companies, but we went with Asaclean®. Their product worked the best, and the service was great. I instantly hit it off with my rep, and we appreciate how we get treated. I've used them ever since.
Roger G., Plant Manager
Read full testimonial
I was struggling with color changeovers on a hot runner tool. I reached out to a few purge companies, but we went with Asaclean®. Their product worked the best, and the service was great. I instantly hit it off with my rep, and we appreciate how we get treated. I've used them ever since.
Roger G., Plant Manager
Asaclean® has proven to be an excellent purging material as validated by internal testing as well as very positive feedb..........
Asaclean® has proven to be an excellent purging material as validated by internal testing as well as very positive feedback from several customers. As Tech Service Engineer for North America I am more than happy to recommend your product.
Bob Lamb, Technical Service Engineer, Vitrex USA Inc.
Read full testimonial
Asaclean® has proven to be an excellent purging material as validated by internal testing as well as very positive feedback from several customers. As Tech Service Engineer for North America I am more than happy to recommend your product.
Bob Lamb, Technical Service Engineer
Asaclean® NCR works great for our medical extrusion products, especially on material changes from PE to TPU. Quick chang..........
Asaclean® NCR works great for our medical extrusion products, especially on material changes from PE to TPU. Quick changeovers and easy to remove with the next product in line. We trialed other products, but nothing came close to the performance of Asaclean®.
Jarred P., Project Manager
Read full testimonial
Asaclean® NCR works great for our medical extrusion products, especially on material changes from PE to TPU. Quick changeovers and easy to remove with the next product in line. We trialed other products, but nothing came close to the performance of Asaclean®.
Jarred P., Project Manager
I have already run various tests with the Asaclean® product and it has reduced scrap considerably. Last week, we had a K..........
I have already run various tests with the Asaclean® product and it has reduced scrap considerably. Last week, we had a KAIZEN course where I had the opportunity to use the purge on a black to white color change. I received excellent time and cost savings results. I think it’s an excellent beginning. I thank you for your support!
Miguel , Process Engineer
Read full testimonial
I have already run various tests with the Asaclean® product and it has reduced scrap considerably. Last week, we had a KAIZEN course where I had the opportunity to use the purge on a black to white color change. I received excellent time and cost savings results. I think it’s an excellent beginning. I thank you for your support!
Miguel , Process Engineer
We use Asaclean® to purge our barrels for color changes and reduced our changeover time by 64%! Asaclean® does the best ..........
We use Asaclean® to purge our barrels for color changes and reduced our changeover time by 64%! Asaclean® does the best at the right price!
William M., Molder
Read full testimonial
We use Asaclean® to purge our barrels for color changes and reduced our changeover time by 64%! Asaclean® does the best at the right price!
William M., Molder
We run about twenty different colors and we don't have to pull our screws. We don't have to do anything additional, othe..........
We run about twenty different colors and we don't have to pull our screws. We don't have to do anything additional, other than running the Asaclean® between colors. We never have contamination issues or streaking.
Rodney Davenport, Vice President, CH3
Read full testimonial
We run about twenty different colors and we don't have to pull our screws. We don't have to do anything additional, other than running the Asaclean® between colors. We never have contamination issues or streaking.
Rodney Davenport, Vice President
We've used Asaclean® for years here at Brabender. The nature of our application lab includes running the most exotic mat..........
We've used Asaclean® for years here at Brabender. The nature of our application lab includes running the most exotic material combinations and thanks to the variety of the available even highest temperature grade purge compounds we are able to clean up the aftermath of the trial greatly reduces the cleanup time. Especially the EX glass filled grade is our favorite formulation doe to the high scrubbing capabilities at even higher temperatures. Several in person clients were so impressed that they were selecting purge compounds from Asaclean® as well for their specific challenge. 5 out of 5 stars from the Brabender Laboratory team for the Asaclean® Purge compounds.
Christoph Pielen, President, C.W. Brabender
Read full testimonial
We've used Asaclean® for years here at Brabender. The nature of our application lab includes running the most exotic material combinations and thanks to the variety of the available even highest temperature grade purge compounds we are able to clean up the aftermath of the trial greatly reduces the cleanup time. Especially the EX glass filled grade is our favorite formulation doe to the high scrubbing capabilities at even higher temperatures. Several in person clients were so impressed that they were selecting purge compounds from Asaclean® as well for their specific challenge. 5 out of 5 stars from the Brabender Laboratory team for the Asaclean® Purge compounds.
Christoph Pielen, President
With Asaclean® we can pull a screw and it is virtually spotless. We had a screw supplier (they also sleeve barrels and r..........
With Asaclean® we can pull a screw and it is virtually spotless. We had a screw supplier (they also sleeve barrels and repair screws) examine the screw after purging with Asaclean® and he was amazed by how clean it was. He said, and I quote, “I have never seen a screw come out that clean!” I too was amazed since that press runs a lot of black 10% GF PC. After purging with Asaclean®, it was clean. I mean spotless. We have not seen the same results from your competition. Asaclean® is hands down better in every application where we’ve been able to trial against the competiton. I stand by that statement.
Brad Borne, President/CEO, Ideas, Inc.
Read full testimonial
With Asaclean® we can pull a screw and it is virtually spotless. We had a screw supplier (they also sleeve barrels and repair screws) examine the screw after purging with Asaclean® and he was amazed by how clean it was. He said, and I quote, “I have never seen a screw come out that clean!” I too was amazed since that press runs a lot of black 10% GF PC. After purging with Asaclean®, it was clean. I mean spotless. We have not seen the same results from your competition. Asaclean® is hands down better in every application where we’ve been able to trial against the competiton. I stand by that statement.
Brad Borne, President/CEO
We know there's other brands, but we use Asaclean® because it works. Period. It's consistent, it performs, the technica..........
We know there's other brands, but we use Asaclean® because it works. Period. It's consistent, it performs, the technical support is second-to-none, and it ships just in time.
Matthew , Molding Manager
Read full testimonial
We know there's other brands, but we use Asaclean® because it works. Period. It's consistent, it performs, the technical support is second-to-none, and it ships just in time.
Matthew , Molding Manager
Using Asaclean® to purge our barrels reduced our changeover time by 64%! Asaclean® does the best at the right price!
Using Asaclean® to purge our barrels reduced our changeover time by 64%! Asaclean® does the best at the right price!
Will , Process Technician, Caps & Closure Co.
Read full testimonial
Using Asaclean® to purge our barrels reduced our changeover time by 64%! Asaclean® does the best at the right price!
Will , Process Technician
We were getting large pieces of carbon in our film that was creating tons of scrap. Normally this would take a few days ..........
We were getting large pieces of carbon in our film that was creating tons of scrap. Normally this would take a few days of purging and temperature cycling or a die bake to resolve but one round of Asaclean® NCR got us back on schedule and into production the following day.
Tyler Boylan, Process Engineer, CNG Inc
Read full testimonial
We were getting large pieces of carbon in our film that was creating tons of scrap. Normally this would take a few days of purging and temperature cycling or a die bake to resolve but one round of Asaclean® NCR got us back on schedule and into production the following day.
Tyler Boylan, Process Engineer
Our engineers report good results and thrilled with the performance of the Asaclean® U Grade. We process polymers in num..........
Our engineers report good results and thrilled with the performance of the Asaclean® U Grade. We process polymers in numerous heat ranges and have predictable (purging) performance with low to no odor while using it. Please continue to deliver the same good product.
Jenn , Production Manager, Tier-One Supplier
Read full testimonial
Our engineers report good results and thrilled with the performance of the Asaclean® U Grade. We process polymers in numerous heat ranges and have predictable (purging) performance with low to no odor while using it. Please continue to deliver the same good product.
Jenn , Production Manager
When I first heard there was a compound that could get PEEK off a screw and barrel instead of a manual cleaning, I was v..........
When I first heard there was a compound that could get PEEK off a screw and barrel instead of a manual cleaning, I was very skeptical. But, given that Asaclean®’s other grades have worked so well for us, I gave it a try. We were able to go from black PEEK to natural polypropylene without a manual screw and barrel clean and without any contamination using the new high-temperature PX2. Asaclean® is the only purging compound I’ll ever use.
Steve , Process Engineer
Read full testimonial
When I first heard there was a compound that could get PEEK off a screw and barrel instead of a manual cleaning, I was very skeptical. But, given that Asaclean®’s other grades have worked so well for us, I gave it a try. We were able to go from black PEEK to natural polypropylene without a manual screw and barrel clean and without any contamination using the new high-temperature PX2. Asaclean® is the only purging compound I’ll ever use.
Steve , Process Engineer
We've had absolutely perfect results with them. We work with a low temp material, and E Grade has made our lives much ea..........
We've had absolutely perfect results with them. We work with a low temp material, and E Grade has made our lives much easier. Thank you for the excellent technical support and training.
Jake M., Lab Technician, Iowa State University
Read full testimonial
We've had absolutely perfect results with them. We work with a low temp material, and E Grade has made our lives much easier. Thank you for the excellent technical support and training.
Jake M., Lab Technician
We tried a “high-temperature” purge from another company and had problems with it. The rep tried to get me to use the re..........
We tried a “high-temperature” purge from another company and had problems with it. The rep tried to get me to use the reformulated product after the first product they gave me solidified in the nozzle. I refused based on the fact that he had me try a product that he knew could solidify. I no longer trusted him. We are now a loyal Asaclean® user and have total faith in it – nothing else comes close to the PF Grade. We use it to purge a PEEK material with nano fibers from Victrex, processed around 750°F – 780°F.
Randy , Process Engineer, Kleiss Gears
Read full testimonial
We tried a “high-temperature” purge from another company and had problems with it. The rep tried to get me to use the reformulated product after the first product they gave me solidified in the nozzle. I refused based on the fact that he had me try a product that he knew could solidify. I no longer trusted him. We are now a loyal Asaclean® user and have total faith in it – nothing else comes close to the PF Grade. We use it to purge a PEEK material with nano fibers from Victrex, processed around 750°F – 780°F.
Randy , Process Engineer
Introducing Asaclean® has made a tremendous improvement at our shop. Before, it would take us up to 30 minutes just to p..........
Introducing Asaclean® has made a tremendous improvement at our shop. Before, it would take us up to 30 minutes just to purge one color or material before we could start a different job. Now that time is down to five to ten minutes, max. It has helped us become more efficient and has improved our start times. It is truly the best purging agent I have worked with.
Eric , Process Engineer
Read full testimonial
Introducing Asaclean® has made a tremendous improvement at our shop. Before, it would take us up to 30 minutes just to purge one color or material before we could start a different job. Now that time is down to five to ten minutes, max. It has helped us become more efficient and has improved our start times. It is truly the best purging agent I have worked with.
Eric , Process Engineer
We have been molding short shots with the UP Grade and it has been working well for us. Our color changes are faster and..........
We have been molding short shots with the UP Grade and it has been working well for us. Our color changes are faster and we waste less resin. A win-win.
Paul , Process Engineer, Tier-One Supplier
Read full testimonial
We have been molding short shots with the UP Grade and it has been working well for us. Our color changes are faster and we waste less resin. A win-win.
Paul , Process Engineer
Screw pulls are not a headache anymore. Asaclean® has drastically reduced the screw pull and replace time.  In fact, whe..........
Screw pulls are not a headache anymore. Asaclean® has drastically reduced the screw pull and replace time.  In fact, when we do a screw pull, Asaclean® peels off like peeling a banana, then we just do an inspection, brush the bore of the barrel, and start measuring. Then put it all back together.  So using your formula we cut the time from 12 hrs to 4 hrs, and cost from $2160 to $741.
R.B. , Production Manager
Read full testimonial
Screw pulls are not a headache anymore. Asaclean® has drastically reduced the screw pull and replace time.  In fact, when we do a screw pull, Asaclean® peels off like peeling a banana, then we just do an inspection, brush the bore of the barrel, and start measuring. Then put it all back together.  So using your formula we cut the time from 12 hrs to 4 hrs, and cost from $2160 to $741.
R.B. , Production Manager
This product pays for itself and then some.
This product pays for itself and then some.
Russ Cannon, Plant Manager, Spirex Corporation
Read full testimonial
This product pays for itself and then some.
Russ Cannon, Plant Manager
EX grade has always been great with screw pulls and removing carbon. The EX purge did what it is advertised to do, it co..........
EX grade has always been great with screw pulls and removing carbon. The EX purge did what it is advertised to do, it completely cleaned out all the degraded material. We followed the EX with the U Grade purge and then were able to go directly into production on one of our clear styrene parts with no contaminants. Needless to say, without the Asaclean® purge we would certainly have had extended downtime and scrap upon the restart.
Lucas Garcia, 2nd Shift Lead, CH3
Read full testimonial
EX grade has always been great with screw pulls and removing carbon. The EX purge did what it is advertised to do, it completely cleaned out all the degraded material. We followed the EX with the U Grade purge and then were able to go directly into production on one of our clear styrene parts with no contaminants. Needless to say, without the Asaclean® purge we would certainly have had extended downtime and scrap upon the restart.
Lucas Garcia, 2nd Shift Lead
We have used the EX Grade before. We ran into a tough problem lately and the EX did the trick! Mostly we’ll use it for c..........
We have used the EX Grade before. We ran into a tough problem lately and the EX did the trick! Mostly we’ll use it for carbon and screw pulls, but also when going from a high-temp resin to a lower-temp resin. I really like the product and would recommend it to anyone!
Ed , 1st Shift Foreman
Read full testimonial
We have used the EX Grade before. We ran into a tough problem lately and the EX did the trick! Mostly we’ll use it for carbon and screw pulls, but also when going from a high-temp resin to a lower-temp resin. I really like the product and would recommend it to anyone!
Ed , 1st Shift Foreman
Asaclean® is working exactly the way we hoped it would. We have been able to cut down our scrap by 30% on one job alone...........
Asaclean® is working exactly the way we hoped it would. We have been able to cut down our scrap by 30% on one job alone. The techs like it for color changes. Your product has given great value to our organization.
Steve D., Production Supervisor
Read full testimonial
Asaclean® is working exactly the way we hoped it would. We have been able to cut down our scrap by 30% on one job alone. The techs like it for color changes. Your product has given great value to our organization.
Steve D., Production Supervisor
“We’re very happy with Asaclean®’s high-temp Grades. We save time and money by being able to purge our high temperature..........
“We’re very happy with Asaclean®’s high-temp Grades. We save time and money by being able to purge our high temperature process right after we finish the molding job, have confidence that our machine is clean and we have little to no rejects when we start our next run.”
Alex DeCarlo, VP of Manufacturing, KB Delta
Read full testimonial
“We’re very happy with Asaclean®’s high-temp Grades. We save time and money by being able to purge our high temperature process right after we finish the molding job, have confidence that our machine is clean and we have little to no rejects when we start our next run.”
Alex DeCarlo, VP of Manufacturing
My company switched to Asaclean® about 3 or 4 years ago. It literally cut the cleaning time of our extruders in half! We..........
My company switched to Asaclean® about 3 or 4 years ago. It literally cut the cleaning time of our extruders in half! We no longer have to use the wire brushes to finish cleaning after purging.
April P., Master Trainer
Read full testimonial
My company switched to Asaclean® about 3 or 4 years ago. It literally cut the cleaning time of our extruders in half! We no longer have to use the wire brushes to finish cleaning after purging.
April P., Master Trainer
Our color changes are all done in 15 minutes or less, so we don’t have time wasted.
Our color changes are all done in 15 minutes or less, so we don’t have time wasted.
Ray D., Plant Manager
Read full testimonial
Our color changes are all done in 15 minutes or less, so we don’t have time wasted.
Ray D., Plant Manager
We run a $25/lb material and we were dealing with carbon. I tried PE but it wasn't working. We started using Asaclean® P..........
We run a $25/lb material and we were dealing with carbon. I tried PE but it wasn't working. We started using Asaclean® PX2, and were seeing good parts in 15 minutes. Some people worry about cost, but $30 of purge paid for itself in one cycle. We saved significantly more than I could've hoped for.
Umberto C., President|Senior Injection Molding Manager, Orbital Plastics
Read full testimonial
We run a $25/lb material and we were dealing with carbon. I tried PE but it wasn't working. We started using Asaclean® PX2, and were seeing good parts in 15 minutes. Some people worry about cost, but $30 of purge paid for itself in one cycle. We saved significantly more than I could've hoped for.
Umberto C., President|Senior Injection Molding Manager
Your service and products never cease to amaze us. Thank you for your inventory reminders.
Your service and products never cease to amaze us. Thank you for your inventory reminders.
Larry A., Purchasing
Read full testimonial
Your service and products never cease to amaze us. Thank you for your inventory reminders.
Larry A., Purchasing
My set-up Technicians really like using Asaclean®. It makes color and material changes so much easier.
My set-up Technicians really like using Asaclean®. It makes color and material changes so much easier.
Willie Vee Nendaal, Production Supervisor, W.C. Wood Co. Ltd
Read full testimonial
My set-up Technicians really like using Asaclean®. It makes color and material changes so much easier.
Willie Vee Nendaal, Production Supervisor
Your product works so well it sells itself. In fact, in most cases, it costs money to NOT have it!
Your product works so well it sells itself. In fact, in most cases, it costs money to NOT have it!
Stan L., Molding Supervisor
Read full testimonial
Your product works so well it sells itself. In fact, in most cases, it costs money to NOT have it!
Stan L., Molding Supervisor
Asaclean®'s price is competitive, the product is working to our satisfaction, their outreach is excellent. I think if I ..........
Asaclean®'s price is competitive, the product is working to our satisfaction, their outreach is excellent. I think if I called my rep at midnight he'd probably answer.
John S., Manufacturing Manager
Read full testimonial
Asaclean®'s price is competitive, the product is working to our satisfaction, their outreach is excellent. I think if I called my rep at midnight he'd probably answer.
John S., Manufacturing Manager
The EX Grade works very well and everybody is really comfortable using it. We also use PX2 Grade for a Polysulfone appli..........
The EX Grade works very well and everybody is really comfortable using it. We also use PX2 Grade for a Polysulfone application and it did a great job minimizing contamination issues that we always deal with when we run this material. The results have been the best start-up since anyone can remember.
Dustin Koob, Process Engineer, Molded Materials Inc.
Read full testimonial
The EX Grade works very well and everybody is really comfortable using it. We also use PX2 Grade for a Polysulfone application and it did a great job minimizing contamination issues that we always deal with when we run this material. The results have been the best start-up since anyone can remember.
Dustin Koob, Process Engineer
I’ve used every purge on the market and Asaclean® is the only ‘quality’ purge I will ever use!
I’ve used every purge on the market and Asaclean® is the only ‘quality’ purge I will ever use!
Shawn , Production Manager
Read full testimonial
I’ve used every purge on the market and Asaclean® is the only ‘quality’ purge I will ever use!
Shawn , Production Manager
The Asaclean® sample worked so well, we had everyone come over to see the purge. We then tested a competitor’s purge aga..........
The Asaclean® sample worked so well, we had everyone come over to see the purge. We then tested a competitor’s purge against the Asaclean® U Grade and the Asaclean® won hands down. We purged ULTEM at 680F and it cleaned the barrel in just a few barrel capacities, a job which we always wind up pulling the screw for. We didn’t need to pull the screw after running U Grade. Asaclean® is the house favorite.
Dave , Molding Manager
Read full testimonial
The Asaclean® sample worked so well, we had everyone come over to see the purge. We then tested a competitor’s purge against the Asaclean® U Grade and the Asaclean® won hands down. We purged ULTEM at 680F and it cleaned the barrel in just a few barrel capacities, a job which we always wind up pulling the screw for. We didn’t need to pull the screw after running U Grade. Asaclean® is the house favorite.
Dave , Molding Manager
We use EX grade (and higher temperature) for a deep, deep scrub. I’ve actually never seen anything quite like it – it re..........
We use EX grade (and higher temperature) for a deep, deep scrub. I’ve actually never seen anything quite like it – it removes everything we want to remove, and it doesn’t stay behind to contaminate the next run in any appreciable amount. We’ve saved a ton of time versus difficult, hot, dirty hand cleaning of our equipment.
Robert Rosen, Director of Materials Development, Evonix
Read full testimonial
We use EX grade (and higher temperature) for a deep, deep scrub. I’ve actually never seen anything quite like it – it removes everything we want to remove, and it doesn’t stay behind to contaminate the next run in any appreciable amount. We’ve saved a ton of time versus difficult, hot, dirty hand cleaning of our equipment.
Robert Rosen, Director of Materials Development
We use Asaclean® for a maintenance program for pulling screws. EX Grade is an unbelievable product for pulling a screw. ..........
We use Asaclean® for a maintenance program for pulling screws. EX Grade is an unbelievable product for pulling a screw. Screw and barrel come out clean, material unwraps on the screw perfectly, and we are back in operation in just a few minutes.
Vincent Zirkle, Plant Manager, Blue Ridge Molding
Read full testimonial
We use Asaclean® for a maintenance program for pulling screws. EX Grade is an unbelievable product for pulling a screw. Screw and barrel come out clean, material unwraps on the screw perfectly, and we are back in operation in just a few minutes.
Vincent Zirkle, Plant Manager
Asaclean® is working well for us - no issues at all! We really want to thank you for your consistent and fair pricing.
Asaclean® is working well for us - no issues at all! We really want to thank you for your consistent and fair pricing.
Andrew Godde, Machine Group Supervisor, Hi-Lex America
Read full testimonial
Asaclean® is working well for us - no issues at all! We really want to thank you for your consistent and fair pricing.
Andrew Godde, Machine Group Supervisor
For most of my career, I wasn't purging properly. I didn't understand why it was important. Once I learned from Asaclean..........
For most of my career, I wasn't purging properly. I didn't understand why it was important. Once I learned from Asaclean®, it changed my whole perspective. Now I'm responsible for my company's P&Ls and need to make sure we're profitable. I can appreciate the amount of money Asaclean® saves me and I'm not scared off by a higher cost per pound. Many buyers don't look past the sticker price to see how far the savings exceed the cost.
Roger , Plant Manager
Read full testimonial
For most of my career, I wasn't purging properly. I didn't understand why it was important. Once I learned from Asaclean®, it changed my whole perspective. Now I'm responsible for my company's P&Ls and need to make sure we're profitable. I can appreciate the amount of money Asaclean® saves me and I'm not scared off by a higher cost per pound. Many buyers don't look past the sticker price to see how far the savings exceed the cost.
Roger , Plant Manager
Our color changes have been reduced by 15+ minutes using the combination CP/Plus grade purge in our hot runners. We use ..........
Our color changes have been reduced by 15+ minutes using the combination CP/Plus grade purge in our hot runners. We use over 4 million pounds of PP per year and I would say we have been able to decrease our scrap % by 1.5% utilizing our Asaclean® products. Compared to using just natural PP in a color change, we save over 23% of our cost by using Asaclean®. When you are talking about 4 million pounds of material per year that is significant.
Dave Salomone, Production Manager, CH3
Read full testimonial
Our color changes have been reduced by 15+ minutes using the combination CP/Plus grade purge in our hot runners. We use over 4 million pounds of PP per year and I would say we have been able to decrease our scrap % by 1.5% utilizing our Asaclean® products. Compared to using just natural PP in a color change, we save over 23% of our cost by using Asaclean®. When you are talking about 4 million pounds of material per year that is significant.
Dave Salomone, Production Manager
After purging with Asaclean® EX Grade and then pulling the screw, the screw had very little residue. But comparing to ho..........
After purging with Asaclean® EX Grade and then pulling the screw, the screw had very little residue. But comparing to how it looked before, it was close to nothing. The guys are giving you lots of thanks for making their screw pushes a lot easier. Once again, thank you.
Liz , Maintenance Manager
Read full testimonial
After purging with Asaclean® EX Grade and then pulling the screw, the screw had very little residue. But comparing to how it looked before, it was close to nothing. The guys are giving you lots of thanks for making their screw pushes a lot easier. Once again, thank you.
Liz , Maintenance Manager
I've been a maintenance professional for 30 years. This was the easiest and cleanest screw pull I've ever completed. Aft..........
I've been a maintenance professional for 30 years. This was the easiest and cleanest screw pull I've ever completed. After removing the EX Grade from the screw, it looked like new. We’re firm believers – this really works as advertised! Every processor should give it a try.
Glen , Process Engineer
Read full testimonial
I've been a maintenance professional for 30 years. This was the easiest and cleanest screw pull I've ever completed. After removing the EX Grade from the screw, it looked like new. We’re firm believers – this really works as advertised! Every processor should give it a try.
Glen , Process Engineer
The U Grade not only keeps the tips and screws clean, but eliminates the need to pull the screw for anything but regular..........
The U Grade not only keeps the tips and screws clean, but eliminates the need to pull the screw for anything but regular preventative maintenance. This has been a major cost savings for us. I estimate that for this particular product line, U Grade reduced restart time by 60 percent, and eliminated unscheduled screw pulls (possibly 12 per year). The U Grade has raised the bar for all purging compounds.
Mike N., Process Technician
Read full testimonial
The U Grade not only keeps the tips and screws clean, but eliminates the need to pull the screw for anything but regular preventative maintenance. This has been a major cost savings for us. I estimate that for this particular product line, U Grade reduced restart time by 60 percent, and eliminated unscheduled screw pulls (possibly 12 per year). The U Grade has raised the bar for all purging compounds.
Mike N., Process Technician
The timing of your delivery was AWESOME! We needed to switch from white color to natural which is always a challenge. I ..........
The timing of your delivery was AWESOME! We needed to switch from white color to natural which is always a challenge. I grabbed the polybag, reviewed the directions, and gave it a shot. I can confidently say the only thing better than your service and delivery times is the product's performance. Wow.
Jerry M., Plastics Manufacturing Manager
Read full testimonial
The timing of your delivery was AWESOME! We needed to switch from white color to natural which is always a challenge. I grabbed the polybag, reviewed the directions, and gave it a shot. I can confidently say the only thing better than your service and delivery times is the product's performance. Wow.
Jerry M., Plastics Manufacturing Manager
During my career I have used different types of purging compounds, but nothing like Asaclean® until now. This is my abso..........
During my career I have used different types of purging compounds, but nothing like Asaclean® until now. This is my absolute favorite product for low and high temp resins. If you haven’t tried it yet, get a sample--you won’t regret it.
Miguel Garcia, Process Engineer
Read full testimonial
During my career I have used different types of purging compounds, but nothing like Asaclean® until now. This is my absolute favorite product for low and high temp resins. If you haven’t tried it yet, get a sample--you won’t regret it.
Miguel Garcia, Process Engineer
If I order on a Monday, it's here within a day or two. I've been buying 7 years and it's right every time. Combined with..........
If I order on a Monday, it's here within a day or two. I've been buying 7 years and it's right every time. Combined with the service and performance, it's an unbelievable total package.
Rodney Davenport, Vice President, CH3
Read full testimonial
If I order on a Monday, it's here within a day or two. I've been buying 7 years and it's right every time. Combined with the service and performance, it's an unbelievable total package.
Rodney Davenport, Vice President
I've used Asaclean® for over 10 years because it's effective, easy-to-use, and leads to cost reduction. Anytime you can ..........
I've used Asaclean® for over 10 years because it's effective, easy-to-use, and leads to cost reduction. Anytime you can work with a great, reliable product that cuts costs, that’s an amazing combination.
Troy F., Process Engineer
Read full testimonial
I've used Asaclean® for over 10 years because it's effective, easy-to-use, and leads to cost reduction. Anytime you can work with a great, reliable product that cuts costs, that’s an amazing combination.
Troy F., Process Engineer
Using Asaclean® we NEVER have to pull screws.
Using Asaclean® we NEVER have to pull screws.
Rob Botherton, Production Supervisor
Read full testimonial
Using Asaclean® we NEVER have to pull screws.
Rob Botherton, Production Supervisor
Results from using Asaclean® were excellent! The toughest spots to purge, the valve gates, were cleaned quickly. Cleanin..........
Results from using Asaclean® were excellent! The toughest spots to purge, the valve gates, were cleaned quickly. Cleaning was verified when parts were injected after the purge and displaced by our PP resin without a problem.
Ramon , Molding Supervisor
Read full testimonial
Results from using Asaclean® were excellent! The toughest spots to purge, the valve gates, were cleaned quickly. Cleaning was verified when parts were injected after the purge and displaced by our PP resin without a problem.
Ramon , Molding Supervisor

Sorry!

No items currently match your filtering criteria.

Get Started

Ready to start improving your efficiency and increasing your profitability?

  • Schedule a Consultation
  • Contact Sales

Free Sample

Request a free sample of Asaclean® Purging Compounds for your plant and start saving today.

Request your free sample

Cost Savings Calculator

Use our free calculator to see how much you could be saving with Asaclean® Purging Compounds.

See your savings